CHINO thermal imaging sensors allow you measure real-time temperature and their Ethernet/USB connectivity allows them to communicate this data to a PC. With a temperature range of -20 to 300°C, and a resolution of 0.5°C, the CHINO TP-L is useful across a number of temperature-dependent applications...
- 9mm lens, fixed focus optics- Uncooled VOX microbolometer detector- 7.5 to 13.0µm spectral range- 25µm detector pitch- ±9°F (±5°C) or ±5% of reading accuracy- Plug-and-Play compatibility- RJ-45 gigabit Ethernet connection 14-bit images at rates as high as 60Hz
What's in the Box
- Hard ..
The AX8 helps you guard against unplanned outages, service interruptions, and equipment failure. You'll get the benefits of continuous condition monitoring and hot spot detection without the need for periodic manual scans.
Compact and easy to install, the AX8 provides continuous monitoring of elect..
The FLIR C2 has a temperature range of –10 to 150°C (14 to 302°F) and provides a basic accuracy of ±2°C (±3.6°F) or 2%, whichever is greater. A wide FOV, high sensitivity, and MSX real time image enhancement detects subtle temperature differences providing stunning detail to help you identify proble..
Featuring Infrared Guided Measurement (IGM) technology, the CM174 visually guides you to the precise location of a potential electrical problem, identifying dangerous and unknown problem areas safely. Confirm your findings with accurate amperage and voltage measurements, and center-point temperature..
The fully-automatic FLIR E4 thermal imaging infrared camera is easy to use out of the box and offers 60 x 80 pixel resolution suitable for everyday, general diagnostic work. The unit is rugged while weighing just 1.2 pounds. The E4 has a temperature range of -4 to 482°F with < 0.15˚C thermal sensiti..
Designed to fit beautifully into your IR inspection program, budget, and the palm of your hand, this infrared camera quickly pays for itself by identifying electrical, mechanical, or building envelope issues before a failure occurs or an expensive tear-down is required.
Easy to use right out of the..
Designed specifically for building diagnostic applications, the E40bx features a fresh array of imaging, communication, and productivity tools to help you identify electrical, mechanical, or building envelope issues; create professional detailed reports; and share images and findings faster.
On-camera analysis offers center spot, hot spot, cold spot, 3 spots and two versions of difference temperature.
FLIR E40sc Infrared Camera Benchtop Test Kit Applications
- Entry Level R&D- Industrial Labs- Education- PCB and Circuit-Board Analysis
The E40sc comes with ResearchIR software; this so..
With a 45° x 34° field of view and FLIRs Multi-Spectral Dynamic Imaging (MSX) technology providing unparalleled clarity in interpreting images, the E5 is the perfect instrument for energy auditors, building inspectors, electrical contractors, predictive maintenance specialists, HVAC professionals, i..
Designed to fit beautifully into your IR inspection program, budget, and the palm of your hand, the E50 quickly pays for itself by identifying electrical, mechanical, or building envelope issues before a failure occurs or an expensive tear-down is required.
The E50 is easy to use right out of the b..